
|
Audio Intercom Kit, 2-Wire.
This Audio Intercom Kit requires only a simple 2-wire connection
from house to gate. The Answering Telephone Handset is powered
by a 12VAC Plug Pack. It can be run up 300m. Simply press
the button from your house to open your gate. You decide who
comes in.
|
 |
 |

|
Audio Intercom Kit, Wireless.
This Wireless Audio Intercom Kit has a range of up to 400m.
The Answering Telephone Handset is cordless; further enhancing
this unit's appeal. With no wires required, it is simple to
install. The Handset can control Gate Operation - even garden
lighting - all at the touch of a button.
|
 |
 |

|
Keypad Digital, 12VDC 3-Output,
4-Wire.
This Digital Keypad is suited to a variety of access control
application. Up to 120 User PINs can be entered across 3 groups.
Programmable for momentary, NO or NC function though 5amp
and 1 amp relays, it features a durable plastic enclosure
with an LED for night illumination.
|
 |
 |

|
Push Button, 2-Wire.
Sealed 2-wire Push Button Unit. The simplest and cheapest
way to provide access for visitors.
|
 |
 |

|
Push Button with Lock, 2-Wire.
Sealed Push Button Unit with integral key-lock to disable
the switch when you are out or don't need visitors.
|
 |
 |

|
Handset, HS2D 2-Button Transmitter.
Handset Transmiter for Sliding Gate Models SL600 & SL2000.
2-Button, 2-Channel 327MHz Transmitter in a compact key-fob
design. Range of up to 40m.
|
 |
 |

|
Handset, HS2E 2-Button Transmitter.
Handset Transmiter for Swing Gate Models SW680 & FG340.
2-Button, Single-Channel 433MHz Transmitter in a compact key-fob
design. Range of up to 40m.
|
 |
 |

|
Photo-Electric Beam Set 12VDC.
Photo-electric Beam Set (PE Cells) comprising Sender &
Receiver. Functional up to 6m, they can be wired for a 'Safety
Beam' or 'Opening Beam'. Most commonly used as a Safety Beam
to prevent inadvertant closure. Can also be set for 'Opening
Beam' to trigger an Open signal whenever the beam is cut.
|
 |
 |

|
Electric Lock, 12VDC Tongue.
A powerful 12VDC Electric Lock with an all steel tongue &
striker. Side-throw operation suited to single gates. This
lock provides maximum protection. Compatible on Swing Gate
Models SW680 & FG340. Approx 10mm gate-to-post clearance
required
|
 |
 |

|
Electric Lock, 12VDC Plunger.
A 12VDC Electric Lock suitable for any Double Gates. It features
a drop bolt (plunger) which engages into a centre rubber Ground
Stop (included in Kit). 20-40mm gate-to-Ground Stop clearance
required
|
 |
 |

|
Battery Charger 350mA.
This 350mA Battery charger is suited to the DC Kits. The Charger is essentially a solar replacement should you have an available power point within 50m.
|
 |
 |

|
Rack Section, Steel reinforced Nylon.
Single Rack Section for Sliding Gate Openers
|
 |
 |

|
Solar Panel 12V 10W.
This 10W Solar Panel suits applications where usage is <15
cycles per day
|
 |
 |

|
Solar Panel 12V 20W.
This 20W Solar Panel suits applications where usage is <30
cycles per day.
|
 |
 |

|
Battery Charger, Plug Pack 12VDC 600mA
Regulated.
This 600mA Plug Pack Battery Charger suits Sliding Gate and
Farm Gate DC Kits. Supply is regulated and plugs directly
onto the Battery. This plug pack can power these gate openers
from up to 100m away.
|
 |
 |

|
Battery 12V 7aH.
7aH Backup Battery for DC and Solar Kits, good for up to 5
days storage
|
 |
 |

|
9amp hour battery.
20% more storage capacity
|
 |
 |
| |
|